Brazed Carbide Tool Bits - 2: Style A
end mills, lathe bits, c'sinks, c'bores, taps, reamers
|
|||||||||||||||||||
|
Brazed Carbide Tool Bits - 2: Style A
|
|||||||||||||||||||
| WARNING: Machine tools present a safety hazard. Improper operation can result in severe injury. These topics are for non-laboratory study only and are not to be used in conjunction with the operation of any tool or machine described herein. Never use a machine tool without the supervision of a qualified instructor. | |||||||||||||||||||
| AR and AL styles are for machining such as turning, boring and chamfering. These tools allow for a sharp ninety degree corner. Use a BL or BR if the part does not require a sharp corner | |||||||||||||||||||
| The AR tool shown here is used for turning a new diameter with the point and a bit of the side of the tool | |||||||||||||||||||
|
|||||||||||||||||||
|
end mills, lathe bits, c'sinks, c'bores, taps, reamers
|
|||||||||||||||||||
| The AL tool shown here is used for turning a new diameter with the broad side of the tool | |||||||||||||||||||
|
|||||||||||||||||||